The 3D Door Handle Lock Set gets its name from the lever: a raised rectangular block that stands proud of the plate, edged in polished chrome so the step between the two surfaces reads as a genuine change in depth rather than a printed line. The plates and lever body are finished in a deep anthracite grey ā darker than steel, lighter than black ā which is what lets the chrome edge do its work.
Key Features of the 3D Door Handle Lock Set
- Raised rectangular lever block that stands proud of the plate for a layered, three-dimensional profile
- Polished chrome edging around the lever face, defining the step in depth
- Deep anthracite grey finish on plates and lever body
- Long rectangular plates with flush round fixing studs at each end
- Three-pin bolt mortise body with key cylinder
- Complete set with striking plate, keys, spindle and screws
Specifications
| Specification | Details |
|---|---|
| Type | Mortise door handle lock set |
| Finish | Anthracite grey with polished chrome lever edging |
| Lever Style | Raised rectangular block, chrome-edged |
| Plate Shape | Long rectangle, square corners |
| Bolt Configuration | 3-pin bolt with latch |
| Model Reference | KH-035 |
| Material | Not specified ā message us on WhatsApp to confirm before ordering |
| SKU | SLP-DHL-11100 |
What Makes a Handle Look “3D”
Most lever handles are a single continuous form ā one shape, one surface, one finish. This one is built as two distinct planes: a base and a raised block sitting on top of it, with a chrome edge marking the boundary. Light hits the two planes at different angles, so the handle casts a small shadow onto its own surface.
That shadow is what the eye reads as depth. It is the same technique used in architectural detailing, where a recessed shadow gap between two surfaces makes a flat wall look considered rather than plain. On a door handle it means the piece has visible structure from across a room, which a smooth lever simply does not.
Why Anthracite Rather Than Black or Steel
Pure black would swallow the chrome edge on a dark door. Bright steel would compete with it. Anthracite grey sits between the two: dark enough that the polished chrome reads as a clear highlight, light enough that the raised block and the base plate remain distinguishable from each other. It is a considered middle tone rather than a compromise, and it explains why this design is not offered in flat black.
Where to Use
Contemporary and Architectural Interiors
Rooms built on clean planes and shadow lines rather than ornament. This handle speaks the same language.
Grey and Concrete Schemes
Anthracite belongs naturally alongside grey tile, polished concrete, and charcoal joinery.
Offices and Meeting Rooms
Dark grey hardware reads as professional without the starkness of full black, and it dates slowly.
Plain Flat Doors
On a door with no panelling or moulding, the handle supplies the visual interest the door lacks.
Installation
Standard mortise fitting ā the lock body seats in a pocket cut into the door edge and the plates fix through the door face. Measure the backset first if you are replacing an existing lock. Because the plate has square corners and hard edges, any misalignment against the door edge shows clearly, so tell your fitter the plate must sit square. Send us a photo of your door edge on WhatsApp for a fit check before ordering.
Before You Buy
- Confirm your door has, or can take, a mortise pocket, and check the backset if replacing
- Check which side your door opens from
- This is key-operated; for keyless privacy locking from inside, choose a set with a thumb-turn
- Square-edged plates highlight misalignment ā worth flagging to your fitter
- Compatibility should be confirmed against the existing installation before ordering
Care & Maintenance
Dry soft cloth on both surfaces. The step between the raised block and the base collects dust along its edge, so run a dry soft brush along it every few weeks to keep the line crisp ā a dust-filled shadow gap is exactly what kills the 3D effect. Avoid abrasive pads on the chrome edging, which scratches permanently.
What’s Included
- 2 Ć anthracite backplates with chrome-edged 3D levers
- 1 Ć mortise lock body with 3-pin bolt and latch
- 1 Ć striking plate
- Keys
- Spindle and fitting screws
Frequently Asked Questions
Why is it called a 3D handle?
The lever is built as a raised block sitting on a base plane rather than a single smooth form. The step between the two, edged in chrome, gives the handle visible depth.
Is the finish black or grey?
Anthracite grey ā noticeably darker than steel, noticeably lighter than black. Beside a matte black handle the difference is clear.
How does this compare to your 3D Cut Grey Door Handle Lock?
That one carries a repeating cut pattern across the plate. This one uses a single raised block on the lever with a chrome edge, so the effect is structural rather than decorative.
Will the chrome edging wear?
It sits on the lever edge rather than the grip surface, so hands rarely touch it. Avoid abrasive cleaners and it holds.
Do you deliver nationwide with COD?
Yes ā Cash on Delivery across Pakistan, 2-3 business day delivery.
Why Buy From Smart Living Pakistan
Smart Living Pakistan is a Lahore-based registered business (Smart Living Pvt Ltd, Gulberg III) stocking genuinely imported hardware, quality-checked before dispatch, backed by responsive WhatsApp support.
Buy With Confidence
- ā Nationwide Cash on Delivery
- š Delivery in 2-3 business days (excluding Sundays)
- š 7-Day Return & Exchange
- š 0305 7015615
- š¢ Smart Living Pvt Ltd, Gulberg III, Lahore
Explore More
For a patterned alternative see the 3D Cut Grey Door Handle Lock, or the Geometric Lines Door Handle Lock ā Rampart for faceted plates. Finish the door with a Top Bolt, or browse all Door Handle Locks.
Parcels weāve delivered
Poore Pakistan mein, mazboot packing ke saath hum daliy deliver kar rahy hain.



















Reviews
There are no reviews yet.